This is the original handmade sterling silver bracelet woven in the beautiful Jens Pind Linkage from tiny sterling silver rings and especially designed to fit big hole or silver cored beads from most bracelet systems including Pandora, Troll and other European brands.

It features a double lobster clasp, so you can add your beads and charms from one side, but also put on your bracelet without losing them!

The diameter of no more than 3.4mm, means you can use this bracelet for beads sized for all known bracelet systems, as well as those produced by the many talented lampwork artists selling silver cored and uncored big hole beads.

With a standard length of 8.25" (21cm), this will fit a 7" (17.75) wrist, allowing for a full compliment of beads and charms,

I am happy to resize up to an inch in either direction at no extra cost - please provide your actual wrist measurement to ensure an accurate fit.

The tag can be personalised with up to two initials - please include details of these with your order.

Not everyone gets on with lobster clasps, so I created a new version of the dominica big hole bead bracelet with a unique toggle design featuring a clever hidden clasp under the t-bar to allow you to add or change beads without losing them every time you put your bracelet on. 

A choice of textures is available for your clasp - hammered, starburst or brushed - if you'd like a different texture or pattern, or a personalised stamped toggle, just contact me to discuss exactly what you'd like.

As always, the basic size is 8.25" - to fit a 7" wrist, but I'm happy to adjust the sizing to fit you perfectly. Simply let me know your actual wrist size when you place your order and I'll make sure it's the right length for you (and your beads!)

This version of the toggle clasped dominica bracelet features the unique hidden clasp under the bar to allow for easy bead changes or additions, and has a very special gemset toggle.

The one shown has an amazonite cabochon, but other options are always available. If you don't see the gemstone or colour you like in the list, feel free to contact me to discuss what you might like on your bracelet - many people choose their clasp to match a particular bead set, or to suit a particular outfit. I keep a huge range of cabochons in stock, as well as the option of gold accents, or various alternative textures.

I found a lot of people seemed to be wondering how else to wear their big hole beads and charms, especially if they had more than would fit on a bracelet or two.

So, I've created a special, short version of the jpl chain I use for my Dominica bracelets, and put balls on it!

With the easy to swap earwires, this style lets you wear one, two, or at a push three beads on each earring - though if you wanted a shorter or longer version, that can be done too. 

This standard version has a drop of 1.25" (3cm) from the base of the earwire, which is 3/4" (2cm) in length. The wires are formed from 0.8mm argentium silver, so are highly tarnish resistant. The handwoven jens pind chain has a diameter of no more than 3.4mm, so will take big hole beads and charms for most bracelet systems. The sterling silver stop bead at the end has a 5mm diameter, but if you have charms with a larger hole, I can happily accommodate this. Please just add a note with purchase, and I'll make them with a larger bead.

All components have been fully hardened and polished to a very high shine.

This is a miniature version of the classic russian wedding ring, fabricated in the same way as the full size version.

These pretty spacer beads or charms are handmade entirely from sterling silver, and work beautifully on their own, with your silver core lampwork beads, or on a fully loaded bracelet! The three rings move freely, making them incredibly tactile, and adding interest to any charm collection. 

Each ring is shaped from 2x1mm d-shaped wire, and is fully soldered before being polished and tumbled for a high shine.

They charms measure approximately 4.5mm long, with a 9mm outer diameter, and have an internal diameter of 5mm - so will fit Pandora, Lovelinks, Troll, Biagi and most other Euroupean bracelet systems - as well as being a perfect match for my own handmade dominica bracelets and earrings.

These pretty spacer beads or charms are handmade entirely from sterling silver, and work beautifully on their own, with your silver core lampwork beads, or on a fully loaded bracelet! The three rings spin freely on the core bead, making them very tactile, and they catch the light wonderfully.

They measure approximately 6mm long, and have an internal diameter of 4.5mm - so will fit Pandora, Lovelinks, Troll, Biagi and most other Euroupean bracelet systems - as well as being a perfect match for my own handmade dominica bracelet or earrings.

This pretty spacer bead or charm is handmade entirely from 1.5mm sterling silver, and works beautifully on its own, with your silver core lampwork beads, or on a fully loaded bracelet! The three stacked rings have been soldered together to make a fun chunky bead that looks great as a spacer, as well as on their own. It has been polished and tumbled for a high shine.

You will receive one charm bead measuring approximately 4.5mm long, with a 7.5mm outer diameter, and have an internal diameter of 4.5mm - so will fit Pandora and most other European bracelet systems - as well as being a perfect match for my own handmade dominica bracelet or earrings.

Another unusual bhb spacer or charm. Made entirely from sterling silver wire, fused at very high heat and polished to a high shine.

Each one is slightly different, but all have an internal diameter of 5mm, so will fit any bracelet system, including my own dominica bracelet and earrings. The average length is between 5.5 and 5mm and the outer diameter between 9 and 11mm.

You will receive one charm.